Search results for "uel cell"
showing 10 items of 262 documents
Continuous hydrothermal synthesis in supercritical conditions as a novel process for the elaboration of Y-doped BaZrO3
2021
Abstract The present work describes a novel process for the elaboration of a ceramic material. Y-doped barium zirconate, an electrolyte material for Protonic Ceramic Fuel cell, was synthesized by a continuous hydrothermal process in supercritical conditions (410 °C/30.0 MPa) using nitrate precursors and NaOH reactants. The use of supercritical water allowed the formation of particles of about 50 nm in diameter with a narrow size distribution. X-Ray Diffraction examination revealed that a major perovskite phase with few BaCO3 and YO(OH) impurities was obtained. BaCO3 is assumed to form due to faster kinetics than Y-doped BaZrO3 resulting in a Ba-deficient perovskite phase. The Ba-deficiency …
Neutron imaging and tomography: Applications in food science
2018
International audience; Neutron imaging and tomography allow observing the structure of large objects (from few to hundred centimeters) at a resolution around 100 μm. This non-destructive method is based on the detection of the transmission of a neutron beam through an object in 2D (imaging) or 3D after rotating the sample (tomography). The components of the object attenuate the neutron beam differently, depending on their composition, and produce accurate pictures of objects which give information about their structure. Neutron imaging has been used for quality control purposes in industries (aircraft, motor engineering...), but also find application from materials sciences (fuel cells, li…
Optimization of the enzyme power source for a nano drug delivery system fuelled by glucose in blood plasma
2019
A unique in vivo electrical pulse generator to improve membrane permeability for drugs and simultaneously facilitate self-powered nano devices for nano drug delivery systems (NDDS) was identified. The use of an unsupported biological catalyst component of the power supply was aimed at the NDDS instead of a conventional membrane electrode assembly (MEA). Self-powered carriers of drugs and prodrugs with improved controlled release capability to target areas using substrate available in biological matrices such as glucose in blood is envisaged. The experimental application implemented prototype designed chambers allowing the entry of premixed precursors and low ohm resistance due the absence o…
Modelling IR Spectra of Sulfonated Polyether Ether Ketone (SPEEK) Membranes for Fuel Cells
2020
Authors acknowledge support from LSC project No 2014/666 ERDF and students ( ) support from project 2DP/2.1.1.1.0/14/APIA/VIAA/009.
Innovative method to estimate state of charge of the hydride hydrogen tank: application of fuel cell electric vehicles
2021
International audience; Significant attention has been paid to metal hydrides (MH) as an environmentally friendly and safe way to store hydrogen. This technology has considerable potential for the application of embedded hydrogen storage in fuel cell electric vehicles, but its widespread application faces a major problem in terms of estimating the remaining hydrogen amount in the tank. In this work, a new method is proposed for estimating the state of charge (SoC) of the hydrogen hydride tank (HHT) by application of piezoelectric material. The idea is to cover the entire inner wall of the metal-hydride tank with a layer of piezoelectric material. During the process of hydrogen absorption, t…
A comprehensive review of energy sources for unmanned aerial vehicles, their shortfalls and opportunities for improvements
2020
Unmanned Aerial Vehicles were first introduced almost 40 years ago and their applications have increased and diversified substantially since then, in both commercial and private use. One of the UAVs main issues when it comes to mobility is that the power sources available are inadequate, this highlights an area for improvement as the interest in drones is on the increase. There exist many different types of power supplies applied to UAVs, however each has their own limitations and strengths that pertain to weight contributions, charging and discharging times, size, payload capabilities, energy density and power density. The aim of this paper is to review the main power sources available for…
Electrooxidation of coconut oil in alkaline electrolyte
2017
Providing more and more energy is an essential task of the today’s energetic industry. In the last few years, in addition to the traditional methods of energy production, alternative energy sources have been developing fast. One of the devices that can make use of these sources is a fuel cell. The fuel cells can be a power source of future mainly due to their high efficiency, low influence on environment and the possibility of powering with different fuels. Most often, fuel cells are powered by hydrogen. However, the problems with its cheap production and storage are the reason for the search for alternative fuels for fuel cells. It is important that the new fuel will be characterized by ze…
From electric mobility to hydrogen mobility: current state and possible future expansions
2020
The expansion of electric vehicles in Italy, has already started a few years ago, but some aspects prevent its expansion. Currently users prefer hybrid technology, mainly due to socio-economic factors related to initial investment and anxiety about autonomy. The aim of the document is to understand if the adoption of Fuel Cell technology can be a solution to overcome the problems of environmental pollution. The possibility to be able to use fuel cells to store electricity is very advantageous, especially on charging times that are significantly reduced. Based on the current situation and analyzing the available data, this work reports the current state of electric mobility in Italy and trie…
Influence of the methodology of inoculation in the performance of air-breathing microbial fuel cells
2017
n this work, four air-breathing microbial fuel cells (AB-MFC) were operated for 1 month in order to determine if the methodology of inoculation affects the steady-state performance of this type of MFCs. For this purpose, anaerobic and aerobic sludge were fed to two identical AB-MFCs without any external carbon source into a tight sealed environment during the first three days of start-up. For comparison purposes, other two AB-MFCs were operated mixing the initial sludge and an amount of sodium acetate as substrate. Results point out that the inoculation procedure does not affect the steady-state treatment capacity of the cells but it affects very seriously the production of electricity. Onl…
An improved cathode for alkaline fuel cells
2010
Abstract The use of nickel foam as an electrode substrate in alkaline fuel cells (AFCs) has been investigated for bipolar cells incorporating an electrically conducting gas diffusion layer (GDL). Improved performance, compared to a previous design, was obtained by adding an extra active layer (AL) composed of manganese (IV) oxide (MnO2) deposited onto carbon black. This new cathode design performed significantly better (130 mA cm−2 at 0.8 V and 25 °C) than the previous design (35 mA cm−2 under the same condition), especially at higher potential. It has been shown that the GDL is a key component of the gas diffusion electrode for both performance and durability, especially with liquid electr…